To keep your glass shower door looking new, the glass needs to be cleaned each week using a damp microfibre cloth and a mild detergent lo remove any soap scum. dirt or grime from the glass. Please refer to the list of acceptable cleaners to use on the protected surfaces found under the care instructions of the EnduroShield website: www.enduroshield.com/Carelnstruction aspx
For exterior glass surfaces such as railings and windows, clean as required using water and a mild detergent (such as washing up liquid). Wash the glass with a microfiber cloth, and dry with a good quality squeegee. Alternatively, clean with a window cleaner and a cloth. For best results clean the glass in the shade to prevent streaking
For interior glass such as showers a squeegee· is not required unless in hard water areas where a good quality squeegee· may be used daily to remove any mineral deposits. For exterior glass surfaces such as railings and windows it is not required however a good quality squeegee· is ideal to remove excess water after cleaning with a mild detergent and ensures a streak free finish.
To keep your shower screen looking new, the glass needs to be cleaned weekly using a damp microfiber cloth and a mild detergent. For exterior glass surfaces such as railings and windows, clean as required using water and a mild detergent (such as dish washing liquid).
No the coating is only 2 molecules thick and is transparent. It will not crack or discolour over time It is not hke a lacquer or varnish.
Generally no, but the coating can be effected by strong acids and alkalis. Warning: The EnduroShield coating can be affected by cleaning products containing strong alkalis and by modern mould removing agents containing a combination of bicach and sodium hydroxide. Aroid these and use alternatives such as pure white vinegar or diluted tea free oil to treat mould on glass and surrounding areas such as tiles.
No. The coating is only two molecules thick and transparent, thus it does not change the appearance of the surface. If an abrasive was used, where the coating was worn away would not be visible. That area would, however, be harder to clean. The unprotected surface can be easily repaired by clea g and re-spraying with EnduroShield. The molecules will bond directly to the untreated surface.
Yes it can EnduroShield after-market applicators can apply EnduroShield to new and existing glass surfaces. When applied.
EnduroShield will prevent the glass from deteriorating and will make it much easier to maintain. In cases where the glass is permanently stained, the applicator may be able to restore the glass back to a near new condition using the EnduroShielde Restoration System.
Enjoy cleaner glass, reduced maintenance, and long-lasting protection with professionally applied EnduroShield® coatings.
